Step-by-Step Guide: How to Effortlessly Change Stocks on a Mossberg 500

Altering the inventory on a Mossberg 500 shotgun might be a good way to customise the match and really feel of the gun, or to improve to a extra snug or aesthetically pleasing inventory. The method is comparatively easy and might be accomplished in just some minutes.

There are a lot of various kinds of shares obtainable for the Mossberg 500, so you may select one which most accurately fits your wants. If you happen to’re unsure what kind of inventory you need, you may at all times seek the advice of with a gunsmith or go to an area gun retailer to see what they’ve in inventory.

After you have chosen a brand new inventory, you may comply with these steps to put in it:

Unload the shotgun and ensure the chamber is empty.
Take away the buttstock by urgent the discharge button and sliding the inventory off the receiver.
Take away the forend by urgent the discharge button and sliding the forend ahead off the barrel.
Set up the brand new forend by sliding it onto the barrel till it clicks into place.
Set up the brand new buttstock by sliding it onto the receiver till it clicks into place.

After you have put in the brand new inventory, you may modify it to suit your physique by adjusting the size of pull and the peak of the comb. You can too add equipment similar to a sling or a cheek relaxation to make the gun extra snug and versatile.

1. Security

When engaged on any firearm, security ought to at all times be the highest precedence. That is very true when engaged on a shotgun, as they’re highly effective firearms that may trigger severe damage or demise if they aren’t dealt with correctly.

Unloading the shotgun
Earlier than starting any work on a shotgun, it’s important to unload it. This implies eradicating the entire shells from the journal and the chamber. To unload the shotgun, open the motion and take away the journal. Then, verify the chamber to guarantee that it’s empty.
Checking the chamber
Even if you’re certain that the shotgun is unloaded, it’s at all times a good suggestion to verify the chamber to guarantee that it’s empty. To do that, open the motion and look into the chamber. If there’s a shell within the chamber, take away it.
Holding the shotgun pointed in a protected route
When engaged on a shotgun, it is very important maintain the shotgun pointed in a protected route always. This implies pointing the shotgun in a route the place it is not going to trigger damage or injury if it have been to discharge.
Sporting eye and ear safety
When engaged on a shotgun, it is very important put on eye and ear safety. This may assist to guard you from flying particles and loud noises.

By following these security suggestions, you may assist to make sure that you’ve got a protected and gratifying expertise when working in your Mossberg 500 shotgun.

2. Instruments

The instruments listed within the above assertion are important for altering the inventory on a Mossberg 500 shotgun. The screwdriver is used to take away the screws that maintain the inventory in place, the punch is used to take away the pins that maintain the set off group in place, and the hammer is used to drive out the pins that maintain the inventory in place.

With out the correct instruments, it will be very tough to alter the inventory on a Mossberg 500 shotgun. The screwdriver is required to take away the screws that maintain the inventory in place, and the punch is required to take away the pins that maintain the set off group in place. The hammer is used to drive out the pins that maintain the inventory in place.If you’re not snug utilizing these instruments, it’s best to take your shotgun to a gunsmith to have the inventory modified. Nevertheless, if you’re assured in your skills, you may change the inventory your self utilizing the next directions:

Unload the shotgun and ensure the chamber is empty.
Take away the buttstock by urgent the discharge button and sliding the inventory off the receiver.
Take away the forend by urgent the discharge button and sliding the forend ahead off the barrel.
Set up the brand new forend by sliding it onto the barrel till it clicks into place.
Set up the brand new buttstock by sliding it onto the receiver till it clicks into place.

By following these directions, you may safely and simply change the inventory in your Mossberg 500 shotgun.

3. Match

The match of the inventory is a vital facet of “How To Change Shares On A Mossberg 500” as a result of it impacts the accuracy of the gun. If the inventory is simply too free, it might trigger the gun to shoot excessive or low, left or proper. It is because the inventory will not be offering a constant platform for the shooter to carry the gun, which might result in inconsistent capturing outcomes.

As well as, a free inventory may also be harmful. If the inventory will not be securely connected to the receiver and barrel, it might come free whereas the gun is being fired. This might trigger the shooter to lose management of the gun, which might result in damage or demise.

For these causes, it is very important guarantee that the brand new inventory matches snugly on the receiver and barrel. This may assist to make sure that the gun is correct and protected to shoot.

There are some things that you are able to do to verify the match of the inventory. First, guarantee that the inventory is correctly seated on the receiver and barrel. There needs to be no gaps between the inventory and the receiver or barrel. Second, attempt to wiggle the inventory back and forth. There needs to be no motion between the inventory and the receiver or barrel. Lastly, attempt to pull the inventory straight off of the receiver and barrel. The inventory mustn’t come off simply.

If you’re unsure whether or not or not the inventory matches correctly, you may take it to a gunsmith to have it checked. A gunsmith also can assist you to make any essential changes to the inventory in order that it matches correctly.

FAQs about “How To Change Shares On A Mossberg 500”

Listed here are some regularly requested questions on “How To Change Shares On A Mossberg 500”:

Query 1: What instruments do I want to alter the inventory on a Mossberg 500?Reply: You will have a number of fundamental instruments to alter the inventory on a Mossberg 500, together with a screwdriver, a punch, and a hammer.Query 2: How do I do know if the brand new inventory matches correctly?Reply: The brand new inventory ought to match snugly on the receiver and barrel. There needs to be no gaps between the inventory and the receiver or barrel, and the inventory mustn’t wiggle or come off simply when pulled.Query 3: Can I modify the inventory on my Mossberg 500 myself?Reply: Sure, you may change the inventory in your Mossberg 500 your self if in case you have the correct instruments and are assured in your skills. Nevertheless, if you’re not snug doing so, you may take your shotgun to a gunsmith to have the inventory modified.Query 4: What are the advantages of adjusting the inventory on my Mossberg 500?Reply: There are a lot of advantages to altering the inventory in your Mossberg 500, together with:

Improved match and luxury
Diminished recoil
Enhanced accuracy
Improved aesthetics

Query 5: What are some issues to remember when altering the inventory on my Mossberg 500?Reply: There are some things to remember when altering the inventory in your Mossberg 500, together with:

Security: At all times unload the shotgun and ensure the chamber is empty earlier than starting any work on the gun.
Match: The brand new inventory ought to match snugly on the receiver and barrel. If the inventory is simply too free, it might have an effect on the accuracy of the gun.
Instruments: You will have a number of fundamental instruments to alter the inventory, together with a screwdriver, a punch, and a hammer.

Query 6: The place can I discover extra details about altering the inventory on my Mossberg 500?Reply: There are a lot of sources obtainable on-line and in print that may give you extra details about altering the inventory in your Mossberg 500. You can too seek the advice of with a gunsmith for skilled recommendation and help.

Suggestions for “How To Change Shares On A Mossberg 500”

Altering the inventory on a Mossberg 500 shotgun is a comparatively easy course of that may be accomplished in just some minutes. Nevertheless, there are a number of suggestions that may assist to make sure that the job is finished accurately and safely:

Tip 1: Security firstAt all times unload the shotgun and ensure the chamber is empty earlier than starting any work on the gun. That is a very powerful security tip to comply with when engaged on any firearm.Tip 2: Use the suitable instrumentsYou will have a number of fundamental instruments to alter the inventory, together with a screwdriver, a punch, and a hammer. Guarantee that the instruments are the right measurement and kind for the job.Tip 3: Match the inventory correctlyThe brand new inventory ought to match snugly on the receiver and barrel. If the inventory is simply too free, it might have an effect on the accuracy of the gun.Tip 4: Take your timeDo not rush the method. It is very important take your time and guarantee that every step is accomplished accurately.Tip 5: Get assist if wantedIf you’re not snug altering the inventory your self, you may take your shotgun to a gunsmith to have the work carried out.Tip 6: Observe securityAt all times maintain the shotgun pointed in a protected route and put on eye and ear safety when engaged on the gun.Tip 7: Clear the gunAfter you have modified the inventory, it’s a good suggestion to scrub the gun to take away any grime or particles that will have gotten inside throughout the course of.Tip 8: Take pleasure in your new inventoryNow that you’ve modified the inventory, you may benefit from the improved match and luxury of your shotgun.

By following the following tips, you may be certain that the job of adjusting the inventory in your Mossberg 500 shotgun is finished accurately and safely.

Abstract of key takeaways or advantages:

Altering the inventory on a Mossberg 500 shotgun is a comparatively easy course of that may be accomplished in just some minutes.
It is very important comply with security precautions when engaged on any firearm.
The brand new inventory ought to match snugly on the receiver and barrel.
Taking your time and utilizing the suitable instruments will assist to make sure that the job is finished accurately.
If you’re not snug altering the inventory your self, you may take your shotgun to a gunsmith to have the work carried out.

By following the following tips, you may be certain that the job of adjusting the inventory in your Mossberg 500 shotgun is finished accurately and safely, and you could benefit from the improved match and luxury of your shotgun for years to return.

Conclusion

Altering the inventory on a Mossberg 500 shotgun is a comparatively easy course of that may be accomplished in just some minutes. Nevertheless, it is very important comply with security precautions and to make use of the suitable instruments to make sure that the job is finished accurately.

The brand new inventory ought to match snugly on the receiver and barrel. If the inventory is simply too free, it might have an effect on the accuracy of the gun. It is usually necessary to take your time and to guarantee that every step is accomplished accurately.

If you’re not snug altering the inventory your self, you may take your shotgun to a gunsmith to have the work carried out. Nevertheless, by following the information outlined on this article, you may safely and simply change the inventory in your Mossberg 500 shotgun to enhance the match and luxury of the gun.